Pale Oak LD18 Laminate T Profile (NEW)

Pale Oak LD18 Laminate T-Bar

The pale oak T-bar from All-In-All has a very light, clean pale oak finish with a fine straight grain and minimal colour variation. It has a natural, almost unfinished oak look that works well with pale oak and light neutral laminate floors. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use a Pale Oak T-Bar

The pale oak T-bar sits over the join between two hard floors that meet at the same height. It suits doorways where laminate meets laminate, or where laminate meets another hard floor at the same level. The bar bridges the join neatly and protects both floor edges from lifting. It also keeps the transition clean underfoot.

Fitting the T-Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the pale oak T-bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This T-bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Pale Oak LD18 sits closest to the Latte laminate scotia beading in the All-In-All range. It is a light neutral tone that complements pale oak laminate floors at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.