Laminate Scotia Beading LD46 Latte

Latte LD46 Laminate Scotia Beading covers the expansion gap left between the edge of your laminate floor and the skirting board. Every floating floor needs room to move as temperature and humidity change throughout the year. In fact, that gap is not a fault – it is a requirement. Furthermore, this Latte Laminate Scotia Beading is the clean, low-profile way to conceal it.

Where to use Latte Laminate Scotia Beading

Latte is a light, sandy-beige oak tone with a fine, clean grain pattern. It works well alongside pale oak, natural oak and sandy-toned laminate floors and sits closest to the Pale Oak LD18 door bars in our laminate range. For white or off-white painted skirting boards, this shade sits warmly at the base of the wall without creating any harsh contrast. Additionally, it suits bright, natural interiors where a light, warm floor tone carries through consistently into the surrounding woodwork for a clean, understated finish.

Sizing and Cutting

The Latte Laminate Scotia Beading profile is 15mm x 15mm and comes in 2.4m lengths. For a standard room perimeter, simply measure the total length needed and calculate how many lengths to order. Where two pieces meet at an internal corner, mitre the ends to suit the angle of the corner for a clean, tight joint.

How to fit Scotia Beading 

First, fix with a pin gun into the skirting board at 45 degrees. However, do not pin into the floor. Pinning into the floor locks the boards in place and causes them to buckle as they try to expand. The beading must therefore only be fixed to the skirting so the floor remains free to move underneath it.

Not sure if this Latte Scotia Beading matches your floor? Simply post us a small offcut. We will then photograph the closest match and email it back to you before you order. The Colour Matching Service is free.