Lacquered Solid Oak Flat Door Bar

£35.99 (inc. VAT)

The Lacquered Oak Flat Bar is a solid oak door bar for finishing the join between two same-height hard floors. Low-profile flat plate – 44mm wide and 6.5mm tall. No fixing track. Glued and pinned directly to the subfloor. Clear lacquer finish over natural oak. Available in 2.4m only.

Products

Select Item(s)QuantityPrice
2.40m

2.40m

£35.99 (inc. VAT)

Description & Downloads

Lacquered Oak Flat Bar – Solid Oak Door Bar

The lacquered oak flat bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Lacquered Oak finish is a clear lacquer over natural oak – no stain, no added colour. The tone ranges from pale honey to deeper amber-brown depending on the individual piece. Fine grain lines and reddish-brown streaks run through the surface naturally. In particular, this natural variation is what you would expect from a real wood product. No two bars will look exactly the same.

The bar is 44mm wide and 6.5mm tall. It sits flat across the join with a low, unobtrusive profile. There is no fixing track on this bar – it fixes directly to the subfloor.

Where to Use a Lacquered Oak Solid Oak Flat Bar

The flat bar is for doorways where both floors sit at the same height and a low-profile finish suits the space. Specifically, it suits internal doorways where solid or engineered wood runs between rooms and a minimal threshold works better than the T-bar profile.

Overall, Lacquered Oak works well in warm, natural interiors. It suits rooms with oak or light wood floors, natural skirting, and traditional or contemporary finishes throughout. Where a higher profile T-bar is preferred, the Lacquered Oak T-Bar is the alternative profile to use.

Fitting and Cutting

Glue the bar to the subfloor across the doorway gap. Pin through the bar into the floor to hold it in place while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The lacquered oak flat bar is available in 2.4m only. It cuts down easily to fit most standard and wider doorway openings.

Not sure if the Lacquered Oak finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.