Lacquered Solid Oak End Bar

£18.00 (inc. VAT)

The Lacquered Oak End Bar is a solid oak door bar for finishing the exposed edge of a solid or engineered wood floor. Suits patio doors, bifold doors, fireplaces, and mat wells. Clear lacquer finish over natural oak with tone varying naturally between pieces. Available in 0.9m and 2.4m.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£18.00 (inc. VAT)

2.40m

2.40m

£43.80 (inc. VAT)

Description & Downloads

Lacquered Oak End Bar – Solid Oak Door Bar

The lacquered oak end bar is a solid oak door bar that gives a neat finish at the exposed edge of a solid or engineered wood floor. The Lacquered Oak finish is a clear lacquer over natural oak – no stain, no added colour. The tone ranges from pale honey to deeper amber-brown depending on the individual piece, with fine grain lines and reddish-brown streaks running through the surface. In particular, this natural variation is what you would expect from a real wood product and no two bars will look exactly the same.

The bar is 34mm wide and 15mm tall at the floor edge, sitting 5mm above the floor on the visible side. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm.

Where to Use a Lacquered Oak Solid Oak End Bar

The end bar is for situations where the floor has an exposed edge with no adjoining floor surface to meet. Specifically, it suits thresholds at patio doors, bifold doors, fireplaces, and mat wells where the solid or engineered wood floor ends without a second floor on the other side.

Overall, Lacquered Oak works well in warm, natural interiors. It suits rooms with oak or light wood floors, natural skirting, and traditional or contemporary finishes throughout. Where there is an adjoining floor at the same height, the Lacquered Oak T-Bar is the correct profile. Where the adjoining floor sits lower, the Lacquered Oak Ramp Bar is the right choice instead.

Fitting and Cutting

Screw or glue the fixing track to the subfloor at the floor edge. Once the floor is fitted up to the track, push the End Bar into the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The lacquered oak end bar is available in 0.9m and 2.4m, selectable on this page. For most standard openings, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider patio door and bifold door openings.

Not sure if the Lacquered Oak finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.