White Brushed LD6 Laminate T Profile (NEW)

White Brushed LD6 Laminate T-Bar

The white brushed T-bar from All-In-All has a clean bright white finish with a subtle brushed grain texture showing through. It is a crisp, bright tone that works well with white and light-toned laminate floors.. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use a White Brushed T-Bar

This bar sits over the join between two hard floors that meet at the same height. It suits doorways where laminate meets laminate, or where laminate meets another hard floor at the same level. The bar bridges the join neatly, protects both floor edges from lifting, and keeps the transition clean underfoot.

Fitting the White Brushed T-Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. Where the track is not suitable, you can glue and pin the bar or fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range – when using adhesive, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the bar cleanly to length. Always wear eye protection when cutting.

White Brushed LD6 sits closest to the White LD1 laminate scotia beading in the All-In-All range. It is the nearest match available for light and white-toned laminate floors at the room edge.

Lengths Available

The white brushed T-bar is available in 0.9m and 2.4m lengths. The 0.9m length suits most standard doorways. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.