White Brushed LD6 Laminate Ramp Profile (NEW)

White Brushed LD6 Laminate Ramp Bar

The white brushed ramp bar from All-In-All has a clean bright white finish with a subtle brushed grain texture showing through. It is a crisp, bright tone that works well with white and light-toned laminate floors. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use the White Brushed Ramp Bar

This bar is the right choice when one hard floor sits higher than the other at a doorway. It tapers from the higher floor down to the lower surface. As a result, it covers the height difference and protects both floor edges in the process. Using the fixing track, it covers height differences of 6-12mm. This suits the majority of standard doorway transitions between hard floors.

The white brushed ramp bar also works at transitions from a hard floor down to carpet. Where a larger height difference needs covering, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method takes you beyond the 12mm track range. When using adhesive, weight the bar down while it sets to ensure a firm bond.

Fitting the White Brushed Ramp Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. A chopsaw or jigsaw will cut the bar cleanly to length. Always wear eye protection when cutting.

White Brushed LD6 sits closest to the White LD1 laminate scotia beading in the All-In-All range. It is the nearest match available for light and white-toned laminate floors at the room edge.

Lengths Available

The ramp is available in 0.9m and 2.4m lengths. The 0.9m length suits most standard doorways. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.