Enhanced Oak LD11 Laminate T Profile (NEW)

Enhanced Oak LD11 Laminate T-Bar

The enhanced oak T-bar from All-In-All has a medium warm oak finish with a slightly muted, matt look. It is a natural, unfussy oak tone that works well with mid-brown and warm-toned laminate floors. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use an Enhanced Oak T-Bar

This T-bar sits over the join between two hard floors that meet at the same height. It suits doorways where laminate meets laminate, or where laminate meets another hard floor at the same level. The bar bridges the join neatly and protects both floor edges from lifting. It also keeps the transition clean underfoot.

Fitting the T-Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the enhanced oak T-bar cleanly to length. Always wear eye protection when cutting.

Length Available

This T-bar is currently available in 2.4m only. This length suits wide openings and can also be cut down for standard doorways where needed.

There is no exact scotia match for Enhanced Oak LD11. However, the full laminate scotia range is available if you need a finishing trim at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.