Charlie Oak Waterproof Ramp Bar LP2

£19.99 (inc. VAT)

The Charlie Oak Waterproof Ramp Bar suits LVT and click vinyl floors where one surface sits higher than the other. A light to medium warm oak effect with a sandy honey base and natural grain variation. Covers 5-10mm with the fixing track or up to 13mm glued. Available in 2.2m only.

Products

Select Item(s)QuantityPrice
2.20m

2.20m

£19.99 (inc. VAT)

Description & Downloads

Charlie Oak Waterproof Ramp Bar

The Charlie Oak Waterproof Ramp is a light to medium warm oak wood-effect door bar for LVT and click vinyl floors. The base sits in a sandy honey range with natural variation across the face – some areas reading lighter and cleaner, others showing more grain movement. The grain has a natural, varied oak character with visible texture throughout. Overall, it suits neutral and modern interiors where a warm, naturally varied wood-effect floor sets a relaxed, grounded tone. It bridges the join where one floor sits higher than the other, covering height differences of 5-10mm using the fixing track included in the pack. The bar measures 45mm wide, sitting 3.8mm above the floor on the low side and 12mm on the high side. A 100% waterproof WPC core runs through the full depth of the bar.

Where to Fit the Charlie Oak Waterproof Ramp

This WPC ramp bar suits hallways, kitchens, bathrooms, utility rooms and conservatories across the UK. In particular, warm oak and wood-effect LVT floors are a popular choice in UK new builds and modern renovations, making this a practical match for a wide range of installations. Doorways where a step exists between two rooms and patio door thresholds where the floor height changes are both common applications. The 100% waterproof WPC core keeps moisture from being a factor at kitchen and bathroom thresholds. Specifically, the wood effect self-adhesive door bars cover a similar colour range if a peel-and-stick option suits better.

Fitting and Cutting

The Charlie Oak Waterproof Ramp clips onto a fixing track included in the pack. The track screws to the subfloor, or bonds down with adhesive where screwing is not possible. Additionally, where the height difference reaches 13mm, glue the bar directly to the subfloor without the track. The bar presses into place once the floor is laid on both sides. Finally, use a chopsaw or jigsaw to cut to length.

Lengths and Colour Matching

LP2 comes in 2.2m only, suiting both standard domestic doorways and wider openings. Furthermore, the full waterproof click vinyl ramp bar range covers over 60 colours if Charlie Oak is not the right match. If you need help confirming a colour, the colour matching service is free. Send a small offcut to the depot and the team confirms the closest match the same day it arrives.