Morning Oak LD16 Laminate T Profile (NEW)

Morning Oak LD16 Laminate T-Bar

The Morning Oak T-Bar from All-In-All has a light grey oak finish with a clean, straight grain running through it. It is a cool, understated tone that works well with grey oak and light-toned laminate floors. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use a Morning Oak T-Bar

The Morning Oak T-Bar sits over the join between two hard floors that meet at the same height. It suits doorways where laminate meets laminate, or where laminate meets another hard floor at the same level. The bar bridges the join neatly and protects both floor edges from lifting. It also keeps the transition clean underfoot.

Fitting the T-Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the Morning Oak T-bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This T-Bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Morning Oak LD16 sits closest to the Morning Oak LD44 Laminate Scotia Beading in the All-In-All range. It is a light grey oak tone that complements morning oak laminate floors at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.