Morning Oak LD16 Laminate Ramp Profile (NEW)

Morning Oak LD16 Laminate Ramp Bar

The morning oak ramp bar from All-In-All has a light grey oak finish with a clean, straight grain running through it. It is a cool, understated tone that works well with grey oak and light-toned laminate floors wherever a height difference needs bridging at a doorway. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use the Morning Oak Ramp Bar

This bar is the right choice when one hard floor sits higher than the other at a doorway. It tapers from the higher floor down to the lower surface. As a result, it covers the height difference and protects both floor edges in the process. Using the fixing track, it covers height differences of 6-12mm. This suits the majority of standard doorway transitions between hard floors.

The morning oak ramp bar also works at transitions from a hard floor down to carpet. Where a larger height difference needs covering, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method takes you beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

Fitting the Ramp Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. A chopsaw or jigsaw will cut the morning oak ramp bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This ramp bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Morning Oak LD16 sits closest to the Morning Oak laminate scotia beading in the All-In-All range. It is a light grey oak tone that complements morning oak laminate floors at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.