Morning Oak LD16 Laminate End Profile (NEW)

Morning Oak LD16 Laminate End Bar

The morning oak end bar from All-In-All has a light grey oak finish with a clean, straight grain running through it. It is a cool, understated tone that works well with grey oak and light-toned laminate floors wherever a floor meets a fixed edge. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer.

Where to Use the Morning Oak End Bar

This bar is the right choice wherever a laminate floor meets a fixed boundary. There is no adjoining floor on the other side. Common locations include patio doors and bifold doors, front door thresholds, hearth edges and mat wells.

At these locations the floor stops at a fixed edge rather than meeting another floor. As a result, the morning oak end bar caps off that edge neatly. This protects it from lifting and gives a clean finish at the floor edge.

Fitting the End Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the morning oak end bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This end bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Morning Oak LD16 sits closest to the Morning Oak laminate scotia beading in the All-In-All range. It is a light grey oak tone that complements morning oak laminate floors at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.