Pewter Grey Solid Oak Ramp Bar

£18.00 (inc. VAT)

The Pewter Grey Ramp Bar is a solid oak door bar for doorways where one floor sits higher than the other. Covers height differences of 17 to 22mm using the fixing track, or up to 27mm when glued. Warm brown oak finish with a subtle grey tinge and grey grain lines. Available in 0.9m and 2.4m.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£18.00 (inc. VAT)

2.40m

2.40m

£43.80 (inc. VAT)

Description & Downloads

Pewter Grey Ramp Bar – Solid Oak Door Bar

The pewter grey ramp bar is a solid oak door bar for doorways where one floor sits higher than the other. The Pewter Grey finish has a warm medium brown oak base with a subtle grey tinge across the surface and greyer grain lines running through. In particular, it is the combination of the warm brown base and the cooler grey tone that gives the bar its distinctive pewter quality. No printed finish replicates it.

The bar is 57mm wide, with a profile that rises to 21mm at the high floor side and steps down to 14mm at the low floor side. It covers height differences of 17 to 22mm using the supplied fixing track.

Where to Use a Pewter Grey Solid Oak Ramp Bar

The ramp profile is for internal doorways where solid or engineered wood sits higher than the adjoining floor. Specifically, it suits situations where a height difference of 17 to 22mm exists between the two surfaces. For larger drops up to 27mm, glue and pin the bar directly to the subfloor without the track. Where both floors sit at the same height, the Pewter Grey T-Bar is the correct profile to use.

Overall, Pewter Grey works well in interiors that mix warm and cool tones – rooms with grey or greyed-brown wood floors, neutral skirting, and understated finishes throughout. It also blends naturally where the floor sits between brown and grey.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap, with the taller side positioned against the higher floor. Once both floors are fitted up to the track, push the Ramp Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The pewter grey ramp bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider doorway openings.

Not sure if the Pewter Grey finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.