Dolphin Grey SA77 Vinyl Self Adhesive L-Shape Nosing

The Dolphin Grey L-Shape Nosing in SA77

The dolphin grey l-shape nosing in SA77 is part of the All-In-All wood effect self-adhesive range. No fixing track, no screws, and no drilling needed. Simply peel the backing and press the nosing firmly into place. This listing covers both the 10mm and 18mm drop versions, and both come in the SA77 dolphin grey finish in 2.7m length. The SA77 finish is a medium grey with a gentle wood grain running through it. It sits naturally alongside medium grey floors with a slight hint of purple or blue and suits modern, neutral interiors where a soft, versatile finish is needed.

Choosing Between the 10mm and 18mm Drop

The drop measurement refers to how far the vertical face of the L-shape nosing hangs down from the floor surface. To choose the right version, simply measure the actual height of your floor. If your floor sits at 10mm or above, the 10mm drop covers the edge neatly. For taller floors sitting at 18mm or above, choose the 18mm drop instead. This gives a better fit and fuller coverage down the floor edge. As a general rule, thicker floors will need the 18mm drop. If in doubt, always measure the full floor height from subfloor to surface before ordering.

Where to Use a Dolphin Grey L-Shape Nosing

This nosing suits hard floors where the floor has an exposed edge that needs a clean, protective finish. It works well at stair edges, patio doors, bifold doors, front door thresholds, fireplaces, and mat wells. The L-shape nosing wraps over the floor edge at a 90 degree right angle and drops down to cover the side, giving a clean finish with no raw edge on show. It also works where a hard floor meets carpet or a lower surface, as the L-shape covers the floor edge and holds the transition neatly in place. Before fitting, the surface must be clean, dry, and free of dust or debris. As a result, any contamination on the base will reduce the adhesive bond. Please note – do not stick directly onto carpet, as the adhesive will not bond to a soft surface.

Lengths

The SA77 dolphin grey l-shape nosing comes in 2.7m only. Simply cut to length using a chopsaw or hacksaw. For stair use, one 2.7m length will typically cover multiple treads depending on stair width. In addition, if you need help choosing a shade, All-In-All offer a free postal colour matching service. Simply post a small flooring offcut to the team and they will then photograph the closest match and email it back the same day.