Dark Walnut LD20 Laminate End Profile (NEW)

Dark Walnut LD20 Laminate End Bar

The dark walnut end bar from All-In-All has a very deep dark brown finish that is almost black in places, with a subtle grain and a rich, heavy tone. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer. As a result, it works well with dark walnut, espresso and near-black laminate floors wherever a floor meets a fixed edge.

Where to Use the Dark Walnut End Bar

This bar is the right choice wherever a laminate floor meets a fixed boundary. There is no adjoining floor on the other side. Common locations include patio doors and bifold doors, front door thresholds, hearth edges and mat wells.

At these locations the floor stops at a fixed edge rather than meeting another floor. As a result, the dark walnut end bar caps off that edge neatly. This protects it from lifting and gives a clean finish at the floor edge.

Fitting the End Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the dark walnut end bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This end bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

There is no exact scotia match for Dark Walnut LD20. However, the full laminate scotia range is available if you need a finishing trim at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.