Brazil Solid Oak T Profile

Brazil T-Bar – Solid Oak Door Bar

The brazil t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Brazil finish is a dark grey-brown with fine natural grain lines running through the surface. In particular, the depth of the dark tone combined with the subtle grain movement gives the bar a bold, moody appearance. No printed finish replicates it.

The bar is 50mm wide and sits 5mm above the floor surface. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use a Brazil Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms. It also suits wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Brazil works well in bold, contemporary interiors – rooms with dark grey or charcoal-toned floors, white or dark skirting, and strong contrast throughout. It also reads well as a deliberate contrast bar set against a lighter floor. Where there is a height difference between the two floors, the Brazil Ramp Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The brazil t-bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider double doorway openings.

Not sure if the Brazil finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.