Brazil Solid Oak End Profile

Brazil End Bar – Solid Oak Door Bar

The brazil end bar is a solid oak door bar that gives a neat finish at the exposed edge of a solid or engineered wood floor. The Brazil finish is a dark grey-brown with fine natural grain lines running through the surface. In particular, the depth of the dark tone combined with the subtle grain movement gives the bar a bold, moody appearance. No printed finish replicates it.

The bar is 34mm wide and 15mm tall at the floor edge, sitting 5mm above the floor on the visible side. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm.

Where to Use a Brazil Solid Oak End Bar

The end bar is for situations where the floor has an exposed edge with no adjoining floor surface to meet. Specifically, it suits thresholds at patio doors, bifold doors, fireplaces, and mat wells where the solid or engineered wood floor ends without a second floor on the other side.

Overall, Brazil works well in bold, contemporary interiors. It suits rooms with dark grey or charcoal-toned floors, white or dark skirting, and strong contrast throughout. Where there is an adjoining floor at the same height, the Brazil T-Bar is the correct profile. Where the adjoining floor sits lower, the Brazil Ramp Bar is the right choice instead.

Fitting and Cutting

Screw or glue the fixing track to the subfloor at the floor edge. Once the floor is fitted up to the track, push the End Bar into the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The brazil end bar is available in 0.9m and 2.4m, selectable on this page. For most standard openings, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider patio door and bifold door openings.

Not sure if the Brazil finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.