Blenheim Oak Waterproof Ramp Bar H07

£10.00 (inc. VAT)

The Blenheim Oak Waterproof Ramp Bar suits LVT and click vinyl floors where one surface sits higher than the other. A warm honey-toned oak finish with a fine, tight vertical grain and occasional lighter streaks. Covers 5-10mm with the fixing track or up to 13mm glued. Comes in 1.1m and 2.2m lengths.

Products

Select Item(s)QuantityPrice
1.10m

1.10m

£10.00 (inc. VAT)

Frequently Bought Together

Description & Downloads

Blenheim Oak Waterproof Ramp Bar

The Blenheim Oak Waterproof Ramp is a warm, honey-toned oak door bar for LVT and click vinyl floors. A fine, tight vertical grain runs in close parallel lines across the face, with occasional lighter streaks breaking through the surface. The tone sits in the mid-range of natural oak with a golden warmth that reads warmer than the grey and sand finishes in the range. Overall, it suits traditional and contemporary interiors where a natural, golden oak floor forms the base tone. It bridges the join where one floor sits higher than the other, covering height differences of 5-10mm using the fixing track included in the pack. The bar measures 45mm wide, sitting 3.8mm above the floor on the low side and 12mm on the high side. A 100% waterproof WPC core runs through the full depth of the bar.

Where to Fit the Blenheim Oak Waterproof Ramp

This WPC ramp bar suits hallways, kitchens, bathrooms, utility rooms and conservatories across the UK. In particular, warm natural oak LVT and click vinyl floors are among the most popular choices in UK new builds and renovations, making this a practical match for a wide range of installations. Doorways where a step exists between two rooms and patio door thresholds where the floor height changes are both common applications. The 100% waterproof WPC core keeps moisture from being a factor at kitchen and bathroom thresholds. Specifically, the wood effect self-adhesive door bars cover a similar colour range if a peel-and-stick option suits better.

Fitting and Cutting

The Blenheim Oak Waterproof Ramp clips onto a fixing track included in the pack. The track screws to the subfloor, or bonds down with adhesive where screwing is not possible. Additionally, where the height difference reaches 13mm, glue the bar directly to the subfloor without the track. The bar presses into place once the floor is laid on both sides. Finally, use a chopsaw or jigsaw to cut to length.

Lengths and Colour Matching

H07 comes in 1.1m and 2.2m lengths. The 1.1m length suits standard domestic doorway widths. Meanwhile, the 2.2m length covers wider openings and longer runs. Furthermore, the full waterproof click vinyl ramp bar range covers over 60 colours if Blenheim Oak is not the right match. If you need help confirming a colour, the colour matching service is free. Send a small offcut to the depot and the team confirms the closest match the same day it arrives.