Stone Grey Solid Oak T Bar

£18.00 (inc. VAT)

The Stone Grey T-Bar is a solid oak door bar in a cool grey finish with warm undertones and natural grain lines. Bridges same-height joins at internal doorways and double doorway openings. Fixing track included. Available in 0.9m and 2.4m.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£18.00 (inc. VAT)

2.40m

2.40m

£43.80 (inc. VAT)

Description & Downloads

Stone Grey T-Bar – Solid Oak Door Bar

The stone grey t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Stone Grey finish is a cool medium grey with warm undertones and fine natural grain lines running through the surface. In particular, the combination of the cool grey tone and the warmth underneath gives the bar a natural, grounded appearance. No printed finish replicates it.

The bar is 50mm wide and sits 5mm above the floor surface. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use a Stone Grey Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms. It also suits wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Stone Grey works well in contemporary, neutral interiors – rooms with grey or stone-toned floors, white or neutral skirting, and understated finishes throughout. It also blends naturally where the floor sits between warm and cool tones. Where there is a height difference between the two floors, the Stone Grey Ramp Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The stone grey t-bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider double doorway openings.

Not sure if the Stone Grey finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.