Natural Oak Waterproof Ramp Bar N3355

£19.99 (inc. VAT)

The Natural Oak Waterproof Ramp suits LVT and click vinyl floors at height-difference joins. A warm mid-brown oak with a dulled, muted tone, alongside distinct darker grain lines and knot-like markings. The grain pattern can make some bars appear slightly different to others – this is normal variation within the colour. 45mm wide, 3.8mm on the low side and 12mm on the high side. Covers height differences of 5-10mm with the fixing track, or up to 13mm where the bar bonds directly to the subfloor. N3355 comes in 2.2m only, suiting both standard domestic doorways and wider openings. A fixing track is included.

Products

Select Item(s)QuantityPrice
2.20m

2.20m

£19.99 (inc. VAT)

Description & Downloads

Natural Oak Waterproof Ramp Bar

The natural oak waterproof ramp is a warm mid-brown oak ramp bar for LVT and click vinyl floors. A warm mid-brown oak with a dulled, muted tone, alongside distinct darker grain lines and knot-like markings running through the surface. The tonal movement gives it a rustic, characterful look rather than a tidy, even finish. Overall, it suits interiors where a rustic, characterful oak floor runs through the space. A 100% waterproof WPC core runs through the full depth of the bar. It covers height differences of 5-10mm with the fixing track. Up to 13mm, the bar bonds directly to the subfloor instead. The bar measures 45mm wide, 3.8mm on the low side and 12mm on the high side.

Where to Fit the Natural Oak Waterproof Ramp

The natural oak waterproof ramp suits hallways, kitchens, bathrooms, utility rooms and conservatories across the UK. In particular, rustic and characterful oak LVT floors are a popular choice in UK new builds and renovations. Therefore, it’s a practical match for a wide range of installations. It also suits doorways where a hard floor meets a slightly lower surface. It works equally well where two floors sit at different heights on either side. The 100% waterproof WPC core handles kitchen and bathroom thresholds without issue.

Fitting and Cutting

Remember to measure twice, cut once. A chopsaw or jigsaw cuts the Natural Oak bar cleanly to length. Always wear eye protection when cutting. The Natural Oak bar clips onto a fixing track included in the pack, covering height differences of 5-10mm. The track screws to the subfloor, or bonds down with adhesive where screwing is not possible. The bar presses into place once the floor is laid on both sides. Additionally, glue and pin the bar in place (using a strong adhesive) without the track for height differences up to 13mm.

Lengths and Colour Matching

N3355 comes in 2.2m only, suiting both standard domestic doorways and wider openings. Furthermore, the full waterproof click vinyl ramp bar range covers over 60 colours if Natural Oak is not the right match. If you’d rather avoid the track altogether, the wood effect self-adhesive door bars offer a peel-and-stick option across a wide range of colours. If you need help confirming a colour, the colour matching service is free. Send a small offcut to the depot and the team confirms the closest match the same day it arrives.