Laminate Scotia Beading LD36 Peanut

Peanut LD36 Laminate Scotia Beading covers the expansion gap left between the edge of your laminate floor and the skirting board. Every floating floor needs room to move as temperature and humidity change throughout the year. In fact, that gap is not a fault – it is a requirement. Furthermore, Peanut Laminate Scotia Beading is the clean, low-profile way to conceal it.

Where to use Peanut Laminate Scotia Beading 

Peanut is a warm, golden mid-brown oak tone with a smooth, natural grain. It works well alongside natural oak and medium-toned laminate floors and sits closest to the Natural Varnished Oak LD8 door bars in our laminate range. For skirting boards with a light wood stain or golden timber finish, this shade keeps the trim consistent with the floor without standing out. Additionally, it suits open plan spaces where a warm, natural oak tone runs through from the flooring into the surrounding trim for a unified finish.

Sizing and Cutting

The Peanut Laminate Scotia Beading profile is 15mm x 15mm and comes in 2.4m lengths. For a standard room perimeter, simply measure the total length needed and calculate how many lengths to order. Where two pieces meet at an internal corner, mitre the ends to suit the angle of the corner for a clean, tight joint.

How to fit Scotia Beading

First, fix with a pin gun into the skirting board at 45 degrees. However, do not pin into the floor. Pinning into the floor locks the boards in place and causes them to buckle as they try to expand. The beading must therefore only be fixed to the skirting so the floor remains free to move underneath it.

Not sure if this Peanut Scotia Beading matches your floor? Simply post us a small offcut. We will then photograph the closest match and email it back to you before you order. The Colour Matching Service is free.