Kingfisher Slate Waterproof Ramp Bar CSPC705

£10.00 (inc. VAT)

The Kingfisher Slate Waterproof Ramp suits LVT and click vinyl floors at height-difference joins. A natural oak grain runs through in subtle lighter and darker tones, set against a very dark, near-charcoal grey base. 45mm wide, 3.8mm on the low side and 12mm on the high side. Covers height differences of 5-10mm with the fixing track, or up to 13mm pinned and glued. Comes in 1.1m and 2.2m lengths with a fixing track included. Note: Kingfisher Slate CSPC705 uses the same colour vinyl as Jasmine Grey LP3 – if your bar arrives with that code don’t panic, it is the correct product.

Products

Select Item(s)QuantityPrice
1.10m

1.10m

£10.00 (inc. VAT)

2.20m

2.20m

£19.99 (inc. VAT)

Description & Downloads

Kingfisher Slate Waterproof Ramp Bar

The kingfisher slate waterproof ramp is a dark charcoal grey ramp bar for LVT and click vinyl floors. A natural oak grain runs through in subtle lighter and darker tones, set against a very dark, near-charcoal grey base. The overall effect is a rich, textured, dramatic dark floor. A 100% waterproof WPC core runs through the full depth of the bar. It covers height differences of 5-10mm with the fixing track. Up to 13mm, the bar bonds directly to the subfloor instead. The bar measures 45mm wide, 3.8mm on the low side and 12mm on the high side.

Where to Fit the Kingfisher Slate Waterproof Ramp

The kingfisher slate waterproof ramp suits hallways, kitchens, bathrooms, utility rooms and conservatories across the UK. In particular, dark charcoal grey LVT floors are a popular choice in UK new builds and renovations. Therefore, it’s a practical match for a wide range of installations. It also suits doorways where a hard floor meets a slightly lower surface. It works equally well where two floors sit at different heights on either side. The 100% waterproof WPC core handles kitchen and bathroom thresholds without issue.

Fitting and Cutting

Remember to measure twice, cut once. A chopsaw or jigsaw cuts the Kingfisher Slate bar cleanly to length. Always wear eye protection when cutting. The Kingfisher Slate bar clips onto a fixing track included in the pack, covering height differences of 5-10mm. The track screws to the subfloor, or bonds down with adhesive where screwing is not possible. The bar presses into place once the floor is laid on both sides. Additionally, glue and pin the bar in place (using a strong adhesive) without the track for height differences up to 13mm.

Lengths and Colour Matching

CSPC705 comes in 1.1m and 2.2m lengths. The 1.1m length suits standard domestic doorway widths. Meanwhile, the 2.2m length covers wider openings and longer runs. Furthermore, the full waterproof click vinyl ramp bar range covers over 60 colours if Kingfisher Slate is not the right match. If you’d rather avoid the track altogether, the wood effect self-adhesive door bars offer a peel-and-stick option across a wide range of colours. If you need help confirming a colour, the colour matching service is free. Send a small offcut to the depot and the team confirms the closest match the same day it arrives.