Coffee Solid Oak T Bar

Coffee T-Bar – Solid Oak Door Bar

The coffee t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Coffee finish is a warm medium brown with natural grain lines running through the surface. In particular, the warmth of the finish and the natural grain movement give the bar a clean, unpretentious character that works well alongside a wide range of wood floors. No printed finish replicates it.

The bar is 50mm wide and sits 5mm above the floor surface. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use a Coffee Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms. It also suits wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Coffee works well in warm, natural interiors – rooms with medium-toned wood floors, oak or warm skirting, and natural finishes throughout. It also blends naturally where the floor colour is close to the bar finish. Where there is a height difference between the two floors, the Coffee Ramp Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The coffee t-bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider double doorway openings.

Not sure if the Coffee finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.