Harbour Grey Solid Oak T Bar

Harbour Grey T-Bar – Solid Oak Door Bar

The harbour grey t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Harbour Grey finish is a pale creamy white with fine cool grey-green grain lines running through the surface. In particular, the lightness of the base tone combined with the subtle grey grain gives the bar a natural, understated character. No printed finish replicates it.

The bar is 50mm wide. The top face sits 5mm above the floor at the crown and tapers to floor level at the edges. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use a Harbour Grey Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms. It also suits wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Harbour Grey works well in light, airy interiors – rooms with pale wood floors, white or off-white skirting, and natural tones throughout. It also blends naturally where the floor colour is close to the bar finish. Where there is a height difference between the two floors, the Harbour Grey Ramp Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The harbour grey t-bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider double doorway openings.

Not sure if the Harbour Grey finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.