Ebony SA101 Self Adhesive Vinyl Flat Door Bar

£11.99 (inc. VAT)

Self-adhesive flat door bar in ebony SA101. No track, no screws – peel the backing and press into place at same-height floor joins. Available in 0.9m and 2.7m. Suits hard floors throughout.

Sample Bundle Product only for Wholesale

Select Item(s)QuantityPrice
0.90m

0.90m

£11.99 (inc. VAT)

2.70m

2.70m

£32.39 (inc. VAT)

Description & Downloads

The Ebony Flat Bar for Same-Height Floor Joins

The ebony flat bar in SA101 is part of the All-In-All wood effect self-adhesive door bar range. This Ebony finish is a very dark brown-black with a visible wood grain running through it, rich and warm rather than flat black – it reads almost black from a distance but shows real wood character up close. It sits naturally alongside very dark or near-black floors and suits bold, contemporary interiors. No fixing track, no screws, no drilling. Simply peel the backing, press the bar firmly into place, and the fitting takes seconds. This listing also covers both 0.9m and 2.7m lengths.

Where to Use a Ebony Flat Bar

This bar suits hard floors where both surfaces in a doorway meet at the same height or within a couple of millimetres of each other. The flat profile sits directly across the join and the self-adhesive backing bonds to the hard floor surface beneath. Before fitting, the base must be clean, dry, and flat. As a result, any dust or debris under the bar will reduce the bond. If the floors sit at different heights, the SA101 ramp bar comes in the same ebony finish and covers both lengths.

Fitting the SA101 Self-Adhesive Flat Bar

Overall, fitting is straightforward. Measure the doorway and cut the bar to length using a chopsaw or hacksaw. Then clean the floor surface where the bar will sit and remove the protective backing strip. Press the bar firmly down along its full length. Hold steady pressure for a few seconds to let the adhesive bond. Finally, keep foot traffic off the bar for a short time after fitting to let the bond settle fully. No specialist tools, no drilling, no screws, and no track needed.

Lengths

The SA101 ebony flat bar comes in two lengths. Simply choose 0.9m for single doorways or 2.7m for wider openings and longer runs. In addition, if you need help choosing a shade, All-In-All offer a free postal colour matching service. Simply post a small flooring offcut to the team and they will then photograph the closest match and email it back the same day.