Old Oak LD12 Laminate T Profile (NEW)

Old Oak LD12 Laminate T-Bar

The old oak T-bar from All-In-All has an aged oak tone that sits a shade darker than a medium golden oak. It has a warm, characterful finish with a visible oak grain running through it. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer. As a result, it works well with aged oak and warm mid-brown laminate floors.

Where to Use an Old Oak T-Bar

The old oak T-bar sits over the join between two hard floors that meet at the same height. It suits doorways where laminate meets laminate, or where laminate meets another hard floor at the same level. The bar bridges the join neatly and protects both floor edges from lifting. It also keeps the transition clean underfoot.

Fitting the T-Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the old oak T-bar cleanly to length. Always wear eye protection when cutting.

Lengths Available

This T-bar is available in 0.9m and 2.4m lengths. For most standard doorways, the 0.9m length is sufficient. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Old Oak LD12 sits closest to the Peru laminate scotia beading in the All-In-All range. It is a warm aged oak tone that complements old oak laminate floors at the room edge.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.