Oak Brown LD3 Laminate End Profile (NEW)

Oak Brown LD3 Laminate End Bar

The oak brown end bar from All-In-All has a deep warm brown finish with an oak grain pattern. It sits a shade darker than a light walnut and richer than a standard medium brown. All-In-All manufacture it exclusively to their own specification using MDF with a laminated top layer. It works well with darker oak and brown-toned laminate floors wherever a floor meets a fixed edge.

Where to Use the Oak Brown End Bar

This bar is the right choice wherever a laminate floor meets a fixed boundary with no adjoining floor on the other side. Common locations include patio doors and bifold doors, front door thresholds, hearth edges and mat wells.

At these locations the floor stops at a fixed edge rather than meeting another floor. As a result, As a result, it caps off that edge neatly. This protects it from lifting and gives a clean finish at the floor edge.

Fitting the Oak Brown End Bar

Fitting uses the included fixing track. First, screw or glue the track to the subfloor, then clip the bar into place. The track accommodates a floor thickness of 6-12mm. However, where the track is not suitable, you can glue and pin the bar. Alternatively, fix it with a strong bonding adhesive instead. Either method gives more flexibility beyond the 12mm track range. In both cases, weight the bar down while it sets to ensure a firm bond.

A chopsaw or jigsaw will cut the bar cleanly to length. Always wear eye protection when cutting.

Oak Brown LD3 sits closest to the Cedar laminate scotia beading in the All-In-All range. It is a warm brown tone that complements oak brown laminate floors at the room edge.

Lengths Available

The oak brown end bar is available in 0.9m and 2.4m lengths. The 0.9m length suits most standard doorways. However, the 2.4m length is useful for wider openings or where more than one cut is needed from a single length.

Not sure if this is the right colour for your floor? All-In-All offer a free postal colour matching service. Simply send a small offcut of your flooring and the team will photograph the closest match from the range. They will then email you the result before you order.