Free Shipping on Orders over £99 (exc. VAT)
Review us on
Shape
Colour Tone
Length
Effect
Thickness
Roll Size
Type
Gripper
Brand Match
Pallet Builder
Door Bars
Stair Nosing
Scotia Beading
Radiator Pipe Covers
Underlays
Installation & Maintenance
Clearance
Point of Sale
Orders placed before 12pm on weekdays will be sent out the same day. All other orders will be processed the next working day*. Please allow up to 72 hours for delivery.
HomeShopFlooring Brand MatchModuleoModuleo Select WoodModuleo Select Wood Country Oak 24130Light Grey SA73 Self Adhesive Vinyl Flat Door Bar
Self-adhesive flat door bar in light grey SA73. No track, no screws – peel the backing and press into place at same-height floor joins. Available in 0.9m and 2.7m. Suits LVT, vinyl click, stick-down vinyl and laminate floors.
0.90m
£11.99 (inc. VAT)
2.70m
£32.39 (inc. VAT)
Total Price:
You have successfully added to your cart.
We only send out samples for colour matching, not for profile type
The light grey flat bar in SA73 is part of the All-In-All wood effect self-adhesive door bar range. This bar suits doorways where both floors sit at the same height and you need a clean, flat finish across the join. No fixing track, no screws, no drilling. Simply peel the backing, press the bar firmly into place, and the fitting takes seconds. The SA73 light grey finish has a warm, mid-toned grey with a subtle wood grain texture that works well alongside grey and neutral-toned LVT and laminate floors. This listing also covers both 0.9m and 2.7m lengths.
This bar suits LVT, vinyl click, stick-down vinyl, and laminate floors. Use it in any doorway where both surfaces meet at the same height or within a couple of millimetres of each other. The flat profile sits directly across the join and the self-adhesive backing bonds to the hard floor surface beneath. Before fitting, the base must be clean, dry, and flat. As a result, any dust or debris under the bar will reduce the bond. If the floors sit at different heights, the SA73 ramp bar comes in the same light grey finish and covers both lengths.
Overall, fitting is straightforward. Measure the doorway and cut the bar to length using a chopsaw or hacksaw. Then clean the floor surface where the bar will sit and remove the protective backing strip. Press the bar firmly down along its full length. Hold steady pressure for a few seconds to let the adhesive bond. Finally, keep foot traffic off the bar for a short time after fitting to let the bond settle fully. No specialist tools, no drilling, no screws, and no track needed.
The SA73 light grey flat bar comes in two lengths. Simply choose 0.9m for single doorways or 2.7m for wider openings and longer runs. In addition, if you need help choosing a shade, All-In-All offer a free postal colour matching service. Simply post a small flooring offcut to the team and they will then photograph the closest match and email it back the same day.
