Laminate Scotia Beading LD33 Cinnamon

Cinnamon LD33 Laminate Scotia Beading covers the expansion gap left between the edge of your laminate floor and the skirting board. Every floating floor needs room to move as temperature and humidity change throughout the year. In fact, that gap is not a fault – it is a requirement. Furthermore, Cinnamon Laminate Scotia beading is the clean, low-profile way to conceal it.

Where to use Cinnamon Laminate Scotia Beading 

Cinnamon is a bright, warm orange-brown tone with a bold grain pattern. It works well alongside reddish, amber and warm-toned laminate floors where a strong, vivid timber colour runs through the room. For skirting boards with a warm wood stain rather than white paint, this shade keeps the trim consistent with the floor rather than breaking it up with a contrast. Rooms with a strong, characterful laminate particularly benefit from this shade, where a close trim match ties everything together without the beading standing out.

Sizing and Cutting 

The Cinnamon Laminate Scotia Beading profile is 15mm x 15mm and comes in 2.4m lengths. For a standard room perimeter, simply measure the total length needed and calculate how many lengths to order. Where two pieces meet at an internal corner, mitre the ends to suit the angle of the corner for a clean, tight joint.

How to fit Scotia Beading

First, fix with a pin gun into the skirting board at 45 degrees. However, do not pin into the floor. Pinning into the floor locks the boards in place and causes them to buckle as they try to expand. The beading must therefore only be fixed to the skirting so the floor remains free to move underneath it.

Not sure if this Cinnamon Scotia Beading matches your floor? Simply post us a small offcut. We will then photograph the closest match and email it back to you before you order. The Colour Matching Service is free.