





Jatoba Stain Solid Oak End Profile
The Jatoba End Bar is a solid oak door bar for finishing the exposed edge of a solid or engineered wood floor. Suits patio doors, bifold doors, fireplaces, and mat wells. Deep dark reddish-brown finish with strong grain lines. Available in 0.9m and 2.4m.
We only send out samples for colour matching, not for profile type
View product informationFrequently Bought Together

Jatoba Stain Solid Oak T Profile
£18.00 (inc. VAT)
View
Jatoba Stain Solid Oak Flush Fit Stair Nosing A
£21.54 (inc. VAT)
View
Jatoba Stain Solid Oak Flush Fit Stair Nosing B
£21.54 (inc. VAT)
ViewDescription & Downloads
Jatoba End Bar – Solid Oak Door Bar
The Jatoba End Bar is a solid oak door bar that gives a neat finish at the exposed edge of a solid or engineered wood floor. The Jatoba finish is a deep dark reddish-brown with strong grain lines running through the surface. In particular, the rich red tone and the depth of the finish give the bar a bold, striking appearance. No printed finish replicates it.
The bar is 34mm wide and 15mm tall at the floor edge, sitting 5mm above the floor on the visible side. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm.
Where to Use a Jatoba Solid Oak End Bar
The end bar is for situations where the floor has an exposed edge with no adjoining floor surface to meet. Specifically, it suits thresholds at patio doors, bifold doors, fireplaces, and mat wells where the solid or engineered wood floor ends without a second floor on the other side.
Overall, Jatoba works well in bold, traditional interiors – rooms with dark cherry or mahogany-toned floors, rich skirting, and warm finishes throughout. Where there is an adjoining floor at the same height, the Jatoba T-Bar is the correct profile to use instead.
Fitting and Cutting
Screw or glue the fixing track to the subfloor at the floor edge. Once the floor is fitted up to the track, push the End Bar into the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.
Cut to length with a chopsaw or jigsaw.
Lengths and Colour Matching
The Jatoba End Bar is available in 0.9m and 2.4m, selectable on this page. For most standard openings, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider patio door and bifold door openings.
Not sure if the Jatoba finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.



