Invisible Solid Oak T Bar

Invisible T-Bar – Solid Oak Door Bar

The invisible t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Invisible finish is a very light oak with a warm yellowish tone and fine natural grain lines running through the surface. In particular, the lightness of the finish means the bar blends naturally into a light oak floor, sitting quietly at the threshold without drawing attention. No printed finish replicates it.

The bar is 50mm wide and sits 5mm above the floor surface. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use an Invisible Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms. It also suits wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Invisible works best where the bar needs to sit as quietly as possible at the threshold. It suits rooms with very light oak or pale natural wood floors. Where a close colour match reduces the visual impact of the bar. Where the floor has an exposed edge with no adjoining surface, the Invisible End Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The invisible t-bar is available in 0.9m. This length suits most standard internal doorways and cuts down easily to fit.

Not sure if the Invisible finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.