Hyde Beige Waterproof Ramp Bar CSPC800

£10.00 (inc. VAT)

The Hyde Beige Waterproof Ramp suits LVT and click vinyl floors at height-difference joins. A pale, muted beige-grey oak with a subtle, straight grain running quietly through the surface. An understated, neutral tone that doesn’t compete with a busier floor. 45mm wide, 3.8mm on the low side and 12mm on the high side. Covers height differences of 5-10mm with the fixing track, or up to 13mm pinned and glued. CSPC800 comes in 1.1m only, suiting standard domestic doorway widths. A fixing track is included.

Products

Select Item(s)QuantityPrice
1.10m

1.10m

£10.00 (inc. VAT)

Frequently Bought Together

Description & Downloads

Hyde Beige Waterproof Ramp Bar

The hyde beige waterproof ramp is a pale beige-grey ramp bar for LVT and click vinyl floors. A pale, muted beige-grey oak with a subtle, straight grain running quietly through the surface. An understated, neutral tone that doesn’t compete with a busier floor. A 100% waterproof WPC core runs through the full depth of the bar. It covers height differences of 5-10mm with the fixing track. Up to 13mm, the bar bonds directly to the subfloor instead. The bar measures 45mm wide, 3.8mm on the low side and 12mm on the high side.

Where to Fit the Hyde Beige Waterproof Ramp

The hyde beige waterproof ramp suits hallways, kitchens, bathrooms, utility rooms and conservatories across the UK. In particular, pale beige-grey oak LVT floors are a popular choice in UK new builds and renovations. Therefore, it’s a practical match for a wide range of installations. It also suits doorways where a hard floor meets a slightly lower surface. It works equally well where two floors sit at different heights on either side. The 100% waterproof WPC core handles kitchen and bathroom thresholds without issue.

Fitting and Cutting

Remember to measure twice, cut once. A chopsaw or jigsaw cuts the Hyde Beige bar cleanly to length. Always wear eye protection when cutting. The Hyde Beige bar clips onto a fixing track included in the pack, covering height differences of 5-10mm. The track screws to the subfloor, or bonds down with adhesive where screwing is not possible. The bar presses into place once the floor is laid on both sides. Additionally, glue and pin the bar in place (using a strong adhesive) without the track for height differences up to 13mm.

Lengths and Colour Matching

CSPC800 comes in 1.1m only, suiting standard domestic doorway widths. Furthermore, the full waterproof click vinyl ramp bar range covers over 60 colours if Hyde Beige is not the right match. If you’d rather avoid the track altogether, the wood effect self-adhesive door bars offer a peel-and-stick option across a wide range of colours. If you need help confirming a colour, the colour matching service is free. Send a small offcut to the depot and the team confirms the closest match the same day it arrives.