Honey Oak SA88 Self Adhesive Vinyl Flat Door Bar

£11.99 (inc. VAT)

Self-adhesive flat door bar in honey oak SA88. No track, no screws – peel the backing and press into place at same-height floor joins. Available in 0.9m and 2.7m. Suits hard floors throughout.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£11.99 (inc. VAT)

2.70m

2.70m

£32.39 (inc. VAT)

Description & Downloads

The Honey Oak Flat Bar for Same-Height Floor Joins

The honey oak flat bar in SA88 is part of the All-In-All wood effect self-adhesive door bar range. The Honey Oak finish is a warm medium oak with a bright golden-yellow tone and a clear, open grain. Richer and more golden than a pale oak, with a warm, honeyed glow to it, it works naturally alongside medium warm-toned floors with a golden oak finish and suits bright interiors where a rich, warm character is needed. No fixing track, no screws, no drilling. Simply peel the backing, press the bar firmly into place, and the fitting takes seconds. This listing also covers both 0.9m and 2.7m lengths.

Where to Use a Honey Oak Flat Bar

This bar suits hard floors where both surfaces in a doorway meet at the same height or within a couple of millimetres of each other. The flat profile sits directly across the join and the self-adhesive backing bonds to the hard floor surface beneath. Before fitting, the base must be clean, dry, and flat. As a result, any dust or debris under the bar will reduce the bond. If the floors sit at different heights, the SA88 ramp bar comes in the same honey oak finish and covers both lengths.

Fitting the SA88 Self-Adhesive Flat Bar

Overall, fitting is straightforward. Measure the doorway and cut the bar to length using a chopsaw or hacksaw. Then clean the floor surface where the bar will sit and remove the protective backing strip. Press the bar firmly down along its full length. Hold steady pressure for a few seconds to let the adhesive bond. Finally, keep foot traffic off the bar for a short time after fitting to let the bond settle fully. No specialist tools, no drilling, no screws, and no track needed.

Lengths

The SA88 honey oak flat bar comes in two lengths. Simply choose 0.9m for single doorways or 2.7m for wider openings and longer runs. In addition, if you need help choosing a shade, All-In-All offer a free postal colour matching service. Simply post a small flooring offcut to the team and they will then photograph the closest match and email it back the same day.