Ebony Solid Wood End Bar

£18.00 (inc. VAT)

The Ebony End Bar is a solid oak door bar for finishing the exposed edge of a solid or engineered wood floor. Suits patio doors, bifold doors, fireplaces, and mat wells. Black finish with natural wood grain. Available in 0.9m and 2.4m.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£18.00 (inc. VAT)

2.40m

2.40m

£43.80 (inc. VAT)

Description & Downloads

Ebony End Bar – Solid Oak Door Bar

The ebony end bar is a solid oak door bar that gives a neat finish at the exposed edge of a solid or engineered wood floor. The Ebony finish is black with the natural wood grain still visible through the surface. In particular, the depth of the black stain combined with the grain movement of the oak gives the bar a bold, striking appearance. No printed finish replicates it.

The bar is 34mm wide and 15mm tall at the floor edge, sitting 5mm above the floor on the visible side. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm.

Where to Use an Ebony Solid Oak End Bar

The end bar is for situations where the floor has an exposed edge with no adjoining floor surface to meet. Specifically, it suits thresholds at patio doors, bifold doors, fireplaces, and mat wells where the solid or engineered wood floor ends without a second floor on the other side.

Overall, Ebony works well in bold, contemporary interiors – rooms with dark wood floors, black or anthracite skirting, and high contrast finishes. Where there is an adjoining floor at the same height, the Ebony T-Bar is the correct profile. Where the adjoining floor sits lower, the Ebony Ramp Bar is the right choice instead.

Fitting and Cutting

Screw or glue the fixing track to the subfloor at the floor edge. Once the floor is fitted up to the track, push the End Bar into the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The ebony end bar is available in 0.9m and 2.4m, selectable on this page. For most standard openings, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider patio door and bifold door openings.

Not sure if the Ebony finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.