Cashmere Solid Oak T Bar

£18.00 (inc. VAT)

The Cashmere T-Bar is a solid oak door bar in a warm golden-yellow finish with natural amber grain detail. Bridges same-height joins at internal doorways and open-plan thresholds. Fixing track included. Available in 0.9m and 2.4m.

Products

Select Item(s)QuantityPrice
0.90m

0.90m

£18.00 (inc. VAT)

2.40m

2.40m

£43.80 (inc. VAT)

Description & Downloads

Cashmere T-Bar – Solid Oak Door Bar

The cashmere t-bar is a solid oak door bar for finishing the join between two hard floors at the same height. The Cashmere finish is a warm golden-yellow with natural grain lines running through in slightly darker amber tones. In particular, the pale gold base and the movement of the grain give the bar the kind of natural character that sits well alongside unfinished and lightly oiled solid wood floors.

The bar is 50mm wide. The top face sits 5mm above the floor at the crown and tapers to floor level at the edges. The supplied fixing track adjusts to floor thicknesses of 14 to 18mm, covering the standard range for solid and engineered wood installations.

Where to Use a Cashmere Solid Oak Door Bar

The T-bar profile is for doorways where both floors sit at the same height. Specifically, it suits internal doorways where solid or engineered wood runs between rooms, and wider double doorway openings where a flooring change creates a visible join without a height step between surfaces.

Overall, Cashmere works well in lighter interiors – rooms with pale wood floors, white or cream skirting, and natural tones throughout. It also blends naturally where the floor colour is close to the bar finish. Where there is a height difference between the two floors, the Cashmere Ramp Bar is the correct profile to use.

Fitting and Cutting

Screw or glue the fixing track to the subfloor in the doorway gap. Once both floors are fitted up to the track, push the T-Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor to hold it in place while the adhesive sets.

Cut to length with a chopsaw or jigsaw.

Lengths and Colour Matching

The cashmere t-bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider double doorway openings.

Not sure if the Cashmere finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.