Free Shipping on Orders over £99 (exc. VAT)
Review us on
Shape
Colour Tone
Length
Effect
Thickness
Roll Size
Type
Gripper
Brand Match
Pallet Builder
Door Bars
Stair Nosing
Scotia Beading
Radiator Pipe Covers
Underlays
Installation & Maintenance
Clearance
Point of Sale
Orders placed before 12pm on weekdays will be sent out the same day. All other orders will be processed the next working day*. Please allow up to 72 hours for delivery.
HomeShopDoor BarsSolid Oak Door BarsLight Smoked Solid Oak Ramp Bar
The Light Smoked Ramp Bar is a solid oak door bar for doorways where one floor sits higher than the other. Covers height differences of 17 to 22mm using the fixing track, or up to 27mm when glued. Dark warm brown finish with a deep smoky quality and prominent natural grain. Available in 0.9m and 2.4m.
0.90m
£18.00 (inc. VAT)
2.40m
£43.80 (inc. VAT)
Total Price:
You have successfully added to your cart.
We only send out samples for colour matching, not for profile type
The light smoked ramp bar is a solid oak door bar for doorways where one floor sits higher than the other. The Light Smoked finish is a dark warm brown with a deep smoky quality and prominent grain lines running through the surface. In particular, the richness of the finish and the natural grain movement give the bar a bold, characterful appearance. No printed finish replicates it.
The bar is 57mm wide, with a profile that rises to 21mm at the high floor side and steps down to 14mm at the low floor side. It covers height differences of 17 to 22mm using the supplied fixing track.
The ramp profile is for internal doorways where solid or engineered wood sits higher than the adjoining floor. Specifically, it suits situations where a height difference of 17 to 22mm exists between the two surfaces. For larger drops up to 27mm, glue and pin the bar directly to the subfloor without the track. Where both floors sit at the same height, the Light Smoked T-Bar is the correct profile to use.
Overall, Light Smoked works well in contemporary and industrial-style interiors – rooms with dark wood floors, charcoal or dark skirting, and strong tonal contrast throughout. It also reads well as a contrast bar set against a lighter floor.
Screw or glue the fixing track to the subfloor in the doorway gap, with the taller side positioned against the higher floor. Once both floors are fitted up to the track, push the Ramp Bar onto the track to finish. If you cannot use the track, glue the bar to the subfloor and pin through the bar into the floor while the adhesive sets. Alternatively, glue and weigh the bar down until the adhesive sets.
Cut to length with a chopsaw or jigsaw.
The light smoked ramp bar is available in 0.9m and 2.4m, selectable on this page. For most standard internal doorways, the 0.9m bar is the right choice. Meanwhile, the 2.4m bar is the better option for wider doorway openings.
Not sure if the Light Smoked finish will match your floor? Take advantage of our colour matching service – send a small floor offcut to us. We will then photograph the closest match and reply before you order. Finally, if you want to see the range in person, visit us in Paignton, Devon.