Laminate Scotia Beading LD35 Beige Travertine

Beige Travertine LD35 Laminate Scotia Beading covers the expansion gap left between the edge of your laminate floor and the skirting board. Every floating floor needs room to move as temperature and humidity change throughout the year. In fact, that gap is not a fault – it is a requirement. Furthermore, Beige Travertine Laminate Scotia Beading is the clean, low-profile way to conceal it.

Where to use Beige Travertine Laminate Scotia Beading

Beige Travertine is a muted grey-beige stone tone with a subtle, almost matt surface texture. It works particularly well alongside tile-effect, stone-effect and neutral laminate floors where a soft, understated trim is needed. For off-white or stone-painted skirting boards, this shade blends in naturally without drawing attention to itself. Additionally, it suits rooms where a cool, neutral colour scheme runs throughout, keeping the trim consistent with both the floor and the walls rather than standing out as a separate element.

Sizing and Cutting 

The Beige Travertine Laminate Scotia Beading profile is 15mm x 15mm and comes in 2.4m lengths. For a standard room perimeter, simply measure the total length needed and calculate how many lengths to order. Where two pieces meet at an internal corner, mitre the ends to suit the angle of the corner for a clean, tight joint.

How to fit Scotia Beading 

First, fix with a pin gun into the skirting board at 45 degrees. However, do not pin into the floor. Pinning into the floor locks the boards in place and causes them to buckle as they try to expand. The beading must therefore only be fixed to the skirting so the floor remains free to move underneath it.

Not sure if this Beige Travertine Scotia Beading matches your floor? Simply post us a small offcut. We will then photograph the closest match and email it back to you before you order. The Colour Matching Service is free.